Last updated: 25 September 2009


nmin2106

from New Micros, Inc



Applications

  • Motion Control
  • Automation Control
  • Industrial Control
  • Network
  • data logging
  • Medical Equipment

Features

  • Board Size(over all): 4.0" x 4.0"
  • Prototype Area: 2.0" x 4.0"
  • Programming Tools & Languages:
  • ARM7TDMI-S CPU
  • CPU oprerating range up to 60Mhz
  • Real Time Clock
  • Memory
    • 128 KByte Program Flash (on-chip)
    • 64 KByte Static Ram (on-chip)
    • 64 KByte Serial EEPROM (I2C interface)
  • 32 General Purpose Digital I/O lines share functions with:
    • SPI Interface
    • Six PWM channels
    • Two 32-bit Timers
    • Two Serial Communication Interfaces
      • UART0, RS-232 serial interface
      • UART1, RS-232 or USB serial Interface with handshaking signals option. Second RS-232 interface is optional.
    • I2C Interface
    • 14 and 20 Pin JTAG connections for flash programming/debugging
    • 3 external Interrupts
  • Two low power modes, Idle and Power down
  • WatchDog Timer
  • Three user LEDs
  • Onboard 5.0V, 3.3V, & 1.8V linear regulators

User programming of internal FLASH is done through through the Serial Communnication Interface or by JTAG connections to host. NMIN-2106-USB-1 is a very cost effective solution.


Accessories required

  • Serial Cable
  • USB Cable (optional)
  • 6-12Vdc @ 200mA or higher

NMIN2106-USB DevKit Plus

DevKit Plus - Includes one NMIN2106-USB board, serial and USB cables, plus an MPE VFX Forth ARM Cross Compiler and all source code for the on-board Forths for the NMIN2106, TiniARM and MPE USB Stamp. The compiler is limited to 120k of code and 64k of RAM. This compiler generates code that is much faster and significantly smaller than the code produced by the on-board Forth's compiler. A rebate of GBP 75.00 is available when upgrading to the full version of the cross compiler.


Prices

Please note that boards are supplied as hardware only with an on-board Forth system. Schematics and other manuals may be downloaded from New Micros.